How to operate 2D Bluetooth Scanner with USB Cradle as a USB virtual COM port?

This only works for the following models:

TMSL-53CR, TMSL-54CR, TMSL-55CR, TMSL-56CR, TMSL-57CR, TMSL-58CR, TMSL-59CR

1. Install virtual com driver 

2. After the driver is installed, please plug the USB Cradle into your PC and scan the following barcode to activate. Please make sure that the scanner is paired to the scanner, the blue led on the cradle will turn on if conneted. You will hear one short beep after the scanner is configuration correctly for the usb virtual com port.  

3. Open you serial software and start to use