How to activate USB virtual COM Port Feature on 2D Wired Scanners

This only works for T22N-AU, T26N-AU, TMSL-60, TMSL-70, TMSL-72, TMSL-73, TMSL-74.

 How to connect the scanner via USB Virtual COM Port

1. Install virtual com driver 

2. After the driver is installed, please plug the scanner into your PC and scan the following barcode to activate. You will hear one short beep after the scanner is configuration correctly for the usb virtual com port.

      3. Check the COM port which the scanner is plugged into

       Your PC/Control Panels/System/Hardware tab/Device Manager/Ports (Com               & LPT)

      4. Open you serial software and start to use